Barroerock Construction fined $972,000 by UK HSE for Asbestos safety failings
Barroerock Construction Limited has been fined after repeated asbestos safety failings.
Canterbury Crown Court heard yesterday how the Health and Safety Executive (HSE) carried out two investigations of working practices of the site in 2013 and 2014 while Barroerock were converting into flats a former nine storey office building in Ashford, Kent, which was known to contain asbestos.
The first investigation arose from a routine safety inspection during one of HSE’s refurbishment campaigns. The Court was told that while a refurbishment and demolition (R&D) survey had been carried out the company had failed to act upon it. This resulted in up to 40 workers being exposed to asbestos during the early demolition phase of the project.
The second investigation culminated in a visit to the site in June 2014 following complaints being made about the health and safety practices at the site. It was found that despite engaging a licensed asbestos contractor to remove the remaining asbestos materials, dangerous practices were continuing. In addition the company was unable to provide documentation to show that asbestos materials identified in the survey had been correctly removed. When the work on site was halted for the second time about 160 people were working inside the building.
It was found in both HSE investigations that these incidents could have been prevented if Barroerock ensured they had effective management controls in place to avoid the risk of exposure to asbestos.
Barroerock Construction Limited of Langley House Park Road, East Finchley, London, who had pleaded guilty to two offences of breaching Regulation 22 (1) (a) of the Construction Design and Management Regulations 2007 at an earlier hearing, has been fined £750,000 and ordered to pay costs of £14,874.68.
Speaking after the hearing HSE inspector Melvyn Stancliffe said: “The company’s failings in this case has put many workers at risk to the exposure of asbestos.
“It was clear there was an endemic failure to effectively manage the construction work on the site in a way which ensured that asbestos materials were not disturbed until removed under appropriate conditions. Failing to prevent the breathing in of asbestos fibres on the site is reckless.”
IMEC Technologies provides Safety Management Software to increase worker safety and aid compliance. IMEC’s Safety Management Software will manage inspections and audits, provides hazard identification, incident reporting, management of corrective and preventative actions from generation to closure. IMEC provides lock out tag out software solutions that will allow users to create lockout tagout procedures using an intuitive Mobile App and Manage Lockout Tagout Procedures, also the Review and Execution of those Lockout Tagout Procedures using the Mobile App. Annual Lockout Tagout Procedures audits are conducted using a Mobile App. The Mobile Inspection App allow users to perform inspections and audits, for example the system can be used as a Fire Extinguisher Barcode Inspection Software system to manage monthly fire extinguisher inspections and general fire safety inspections and also to record safety observations and manage corrective actions, anywhere and anytime. The solution can be used as a fire extinguisher barcode inspection software system or life safety inspection system to aid compliance in Higher Education, Healthcare, Industrial and Commercial Organizations. Benefits from a Fire Extinguisher Barcode System include the elimination of paperwork and reducing the burden of compliance with regulations such as NFPA, The Joint Commission. The Incident Reporting App allows users to easily and quickly report incidents, hazards and near-misses, these are then sent to the appropriate people for action and are managed to closure. Web Apps provide features such as, setup, management, scheduling tools, analysis, reporting and dashboards etc with the ability to report incidents to government bodies such as OSHA and RIDDOR. HazMat T&T is a hazardous waste management software solution designed for Environmental Service Companies and companies who generate a large quantity of hazardous waste. The solution tracks hazardous waste from cradle to grave aiding compliance, providing accurate waste inventory, increasing waste handling efficiency, reducing risk and also helps manage waste costs. HazMat T&T Hazardous Waste Management Software can be deployed in a number of deployment scenarios, from Large Hazardous Waste Generators, tracking their hazardous waste at their site to Environmental Service and Waste Management Companies using it track and manage hazardous waste at transfer and disposal sites. For more information visit our website www.imectechnologies.com