EHS & Waste Management

Wireless Detection Fire Alarms – How do They Work?

By April 19, 2021 No Comments

There are several different technologies for fire protection, one of the most innovative on the market right now is wireless detection fire alarms. Because wired systems require a physical network in the building, wired fire alarms always stand at a risk (although minimal with proper inspection and regular maintenance) of being unable to alert individuals to the presence of a fire.

Wireless detection fire alarms do not need physical cabling for connectivity as they are connected to a fire alarm control panel or FACP wirelessly. This panel is also connected to the building’s electrical system. Many panels can also be attached to batteries or other back-up power systems if the electricity fails.

How Does a Wireless Detection System Prevent Fires?

These detectors work by using radio frequency (RF). Depending on the specific detector, they may be able to use thermistors to sense heat or use biochemical or opto-chemical cells to detect carbon monoxide or may use photo electricity to sense smoke.

Whichever detection method is used it is more efficient and with fewer false alarms than other detection systems.

The detector can also be attached to a smart network. This network can inform those within the building of paths they should take to reach safety. This is vital for firefighters who can coordinate with those individuals inside of the building to reach the best location for rescue. It can also help first responders identify exactly where the fire is in a building, as each device has a unique identifier.

It can also inform occupants in the building about other hazards, for example hazardous weather outside.

These systems are especially suitable for large campuses or facilities, industrial and manufacturing plants.

 

Fire Extinguisher Barcode Inspection Software

Fire Extinguisher Barcode Inspection Software system can be used to manage monthly fire extinguisher inspections, annual inspections and 6 year and 12 year inspections and also general fire safety inspections. Allowing Managers to record safety observations while performing facility tours which can improve overall fire safety. A Fire Extinguisher Inspection Software system that can create corrective actions as a result of inspection failures and allocate these corrective active actions to the appropriate persons, with deadlines for resolution will greatly reduce the time, effort and cost of managing NFPA inspections. Implementing a Fire Extinguisher Barcode System, where users scan each fire extinguisher using a Mobile Fire Extinguisher Inspection Software App aids with compliance with NFPA and The joint Commission and other Authorities having Jurisdiction(ADJ’s)  within Universities, Colleges, Hospitals, Medical Centers, Manufacturing, Oil and Gas and many other sectors.

Easy to Use – Fire Extinguisher Barcode System

IMEC Inspection Software is an easy to use fire extinguisher barcode system which will schedule, manage, track and report on any type of inspection, including Facility, Equipment, People etc. Use Cases include fire extinguisher barcode system, eyewash stations, emergency showers, equipment or asset inspection system or facilities inspection software. When used as a fire extinguisher barcode system Inspections are performed via the Mobile app which is available on iOS, Android and Windows devices. The user identifies the inspection point by scanning a barcode, or picking from a list based on location. The Mobile App which is part of the fire extinguisher barcode system will then display the list of custom Forms or Checklists.  The fire extinguisher barcode system inspections can be performed offline if no internet connection is available.

The IMEC Mobile Safety App can also be used as a Fire Door Inspection App and with the Web based flexible Forms Manager the solution can be used as a Fire Door Inspection Software Solution also. Fire Door Inspection Software is used is large facilities with large quantities of Fire Doors like Hospitals, Universities and also Cruise Ships.

Not Just A Fire Extinguisher Barcode System but a Complete Fire Life Safety Inspection Software Solution

IMEC Inspection Software can be deployed as a full Fire Life Safety Inspection Software solution that can be used to manage an organization’s full range of fire and life safety inspections.  The IMEC Fire Life Safety Inspection Software can manage any type of inspection, use cases include Fire Doors, Fire Pumps, Eyewash Stations, Emergency Lights, Emergency Showers, Grease Traps, AED’s and many more.  The IMEC Fire Life Safety Inspection Software can manage any type safety equipment or asset inspection. The user identifies the inspection point by scanning a barcode, or picking from a list based on location. The Mobile App will then display the list of custom Forms or Checklists

IMEC Technologies provides Safety Management Software to increase worker safety and aid compliance. IMEC’s Safety Management Software will manage inspections and audits, provides hazard identificationincident reporting, management of corrective and preventative actions from generation to closure. IMEC provides lock out tag out software solutions that will allow users to create lockout tagout procedures using an intuitive Mobile App and Manage Lockout Tagout Procedures, also the Review and Execution of those Lockout Tagout Procedures using the Mobile App. Annual Lockout Tagout Procedures audits are conducted using a Mobile App. The Mobile Inspection App allow users to perform inspections and audits, for example the system can be used as a Fire Extinguisher Barcode Inspection Software system to manage monthly fire extinguisher inspections and general fire safety inspections and also to record safety observations and manage corrective actions, anywhere and anytime. The solution can be used as a fire extinguisher barcode inspection software system or life safety inspection system to aid compliance in Higher Education, Healthcare, Industrial and Commercial Organizations. Benefits from a Fire Extinguisher Barcode System include the elimination of paperwork and reducing the burden of compliance with regulations such as NFPA, The Joint Commission. The Mobile App can also be used as a Fire Door Inspection App and with the flexible Forms Manager the solution can be used as a Fire Door Inspection Software Solution also. Fire Door Inspection Software is used is large facilities with large quantities of Fire Doors like Hospitals, Universities and also Cruise Ships. The Incident Reporting App allows users to easily and quickly report incidents, hazards and near-misses, these are then sent to the appropriate people for action and are managed to closure.  Web Apps provide features such as, setup, management, scheduling tools, analysis, reporting and dashboards etc with the ability to report incidents to government bodies such as OSHA and RIDDORHazMat T&T is a hazardous waste management software solution designed for Environmental Service Companies and companies who generate a large quantity of hazardous waste. The solution tracks hazardous waste from cradle to grave aiding compliance, providing accurate waste inventory, increasing waste handling efficiency, reducing risk and also helps manage waste costs. HazMat T&T Hazardous Waste Management Software can be deployed in a number of deployment scenarios, from Large Hazardous Waste Generators, tracking their hazardous waste at their site to Environmental Service and Waste Management Companies using it track and manage hazardous waste at transfer and disposal sites. For more information visit our website www.imectechnologies.com