A waste management and skip hire company has been fined after a worker suffered multiple injuries when he was struck by a reversing skip vehicle.
Mold Magistrates’ Court heard how on 6 June 2019, a skip vehicle driver drove into the waste management yard area of Thorncliffe Building Supplies’ Abergele site and parked his vehicle. As he was removing the net from the skip, a loading shovel from the same company reversed into the driver, trapping him between his vehicle and the loading shovel. He sustained life changing injuries including fractures to his pelvis and a crushed bowel.
An investigation by the Health and Safety Executive (HSE) into the incident found that the system of work to control risks from transport was not fully adequate and not monitored; and as a result, was not being followed therefore exposing workers to risks. At the time of the incident the inner banksman, who is responsible for managing traffic at the site, was not present at his station and there weren’t any measures in place to prevent new skip vehicle(s) from accessing the site.
Thorncliffe Building Supplies Limited of Allt y Graig, Meliden Road, Rhyl pleaded guilty to breaching Section 2 (1) of the Health and Safety at Work Act 1974 and have been fined £180,000 and ordered to pay costs of £5,856.
Speaking after the case, HSE inspector Sarah Baldwin-Jones said: “This incident could so easily have been avoided by simply following correct control measures and safe working practices.
“Monitoring of the safe working practice and CCTV evidence would have highlighted risks created when the banksman left the yard area. A rising barrier fitted at the yard entrance, or relief cover for the banksman during the day, would have prevented this incident occurring.
“Companies should be aware that HSE will not hesitate to take appropriate enforcement action against those that fall below the required standards.”
IMEC Technologies provides Safety Management Software to increase worker safety and aid compliance. IMEC’s Safety Management Software will manage inspections and audits, provides hazard identification, incident reporting, management of corrective and preventative actions from generation to closure. IMEC provides lock out tag out software solutions that will allow users to create lockout tagout procedures using an intuitive Mobile App and Manage Lockout Tagout Procedures, also the Review and Execution of those Lockout Tagout Procedures using the Mobile App. Annual Lockout Tagout Procedures audits are conducted using a Mobile App. The Mobile Inspection App allow users to perform inspections and audits, for example the system can be used as a Fire Extinguisher Barcode Inspection Software system to manage monthly fire extinguisher inspections and general fire safety inspections and also to record safety observations and manage corrective actions, anywhere and anytime. The solution can be used as a fire extinguisher barcode inspection software system or life safety inspection system to aid compliance in Higher Education, Healthcare, Industrial and Commercial Organizations. Benefits from a Fire Extinguisher Barcode System include the elimination of paperwork and reducing the burden of compliance with regulations such as NFPA, The Joint Commission. The Incident Reporting App allows users to easily and quickly report incidents, hazards and near-misses, these are then sent to the appropriate people for action and are managed to closure. Web Apps provide features such as, setup, management, scheduling tools, analysis, reporting and dashboards etc with the ability to report incidents to government bodies such as OSHA and RIDDOR. HazMat T&T is a hazardous waste management software solution designed for Environmental Service Companies and companies who generate a large quantity of hazardous waste. The solution tracks hazardous waste from cradle to grave aiding compliance, providing accurate waste inventory, increasing waste handling efficiency, reducing risk and also helps manage waste costs. HazMat T&T Hazardous Waste Management Software can be deployed in a number of deployment scenarios, from Large Hazardous Waste Generators, tracking their hazardous waste at their site to Environmental Service and Waste Management Companies using it track and manage hazardous waste at transfer and disposal sites. For more information visit our website www.imectechnologies.com