CANTON, GA – A federal workplace safety investigation into a Jan. 19, 2022, ammonia leak that hospitalized two workers and led to the evacuation of about 50 workers at a Canton poultry processing plant found their employer might have prevented the incident by ensuring required safety standards were followed.
Inspectors with the U.S. Department of Labor’s Occupational Safety and Health Administration found the uncontrolled temperature and pressure conditions on an ammonia refrigeration system contributed to the release of ammonia. Liquid and vapor ammonia were dispersed in the air and engulfed the emergency exit doors that discharged outside. In addition to the hospitalized workers, one worker was treated on the scene.
OSHA issued nine serious citations for inadequately implementing and maintaining the process safety management program for controlling anhydrous ammonia hazards in industrial refrigeration systems. Specifically, the employer failed to:
- Confirm a pre-startup safety review before introducing a highly hazardous chemical into an existing process, and include instructions to address process deviations.
- Train workers on the physical and health hazards of anhydrous ammonia.
- Ensure exit signs were properly illuminated and clearly identified.
- Maintain safe walking and working surfaces.
OSHA has proposed $110,630 in penalties.
“The failures identified in this case are inexcusable,” said OSHA Area Office Director Joshua Turner in Atlanta-East. “This incident should serve as a reminder to employers of their legal obligation to maintain a complete and up-to-date process safety management program, and ensure workers are trained on the dangers of hazardous chemicals and the importance of following safety precautions.”
Exposure to harmful substances in the workplace increased from 379 workers affected in 2019 to 448 workers affected in 2020, the Bureau of Labor Statistics reports.
Pilgrim’s Pride Corp. in one of the world’s largest poultry and pork producers with approximately 58,000 workers at locations in 14 U.S. states, the United Kingdom, Mexico, Puerto Rico and Europe.
The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director, or contest the findings before the independent Occupational Safety and Health Review Commission.
Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to ensure these conditions for America’s workers by setting and enforcing standards, and providing training, education and assistance.
IMEC Technologies provides Safety Management Software to increase worker safety and aid compliance. IMEC’s Safety Management Software will manage inspections and audits, provides hazard identification, incident reporting, management of corrective and preventative actions from generation to closure. IMEC provides lock out tag out software solutions that will allow users to create lockout tagout procedures using an intuitive Mobile App and Manage Lockout Tagout Procedures, also the Review and Execution of those Lockout Tagout Procedures using the Mobile App. Annual Lockout Tagout Procedures audits are conducted using a Mobile App. The Mobile Inspection App allow users to perform inspections and audits, for example the system can be used as a Fire Extinguisher Barcode Inspection Software system to manage monthly fire extinguisher inspections and general fire safety inspections and also to record safety observations and manage corrective actions, anywhere and anytime. The solution can be used as a fire extinguisher barcode inspection software system or life safety inspection system to aid compliance in Higher Education, Healthcare, Industrial and Commercial Organizations. Benefits from a Fire Extinguisher Barcode System include the elimination of paperwork and reducing the burden of compliance with regulations such as NFPA, The Joint Commission. The Incident Reporting App allows users to easily and quickly report incidents, hazards and near-misses, these are then sent to the appropriate people for action and are managed to closure. Web Apps provide features such as, setup, management, scheduling tools, analysis, reporting and dashboards etc with the ability to report incidents to government bodies such as OSHA and RIDDOR. HazMat T&T is a hazardous waste management software solution designed for Environmental Service Companies and companies who generate a large quantity of hazardous waste. The solution tracks hazardous waste from cradle to grave aiding compliance, providing accurate waste inventory, increasing waste handling efficiency, reducing risk and also helps manage waste costs. HazMat T&T Hazardous Waste Management Software can be deployed in a number of deployment scenarios, from Large Hazardous Waste Generators, tracking their hazardous waste at their site to Environmental Service and Waste Management Companies using it track and manage hazardous waste at transfer and disposal sites. For more information visit our website www.imectechnologies.com